Memory/battery problems were detected error and boot process is stuck during boot of Dell-based or Intel-based RSA SecurID A250 hardware appliance
Originally Published: 2020-05-28
Last Modified: 2023-10-06
Article Number
Applies To
RSA Product/Service Type: Dell and Intel-based RSA SecurID A250 hardware appliance
RSA Version/Condition: 8.x
Issue
Memory/Battery problems were detected.
The adapter has recovered, but cached data was lost. Press any key to continue.
The following error is similar:
Cache data was lost, but the controller has recovered. This could be due to the fact
that your controller had protected cache after an unexpected power loss and your
system was without power longer than the battery backup time.
Press any key to continue or 'C' to load the configuration utility.Cause
There can be more than one cause for such message. For example,
- The adapter detects data in the controller cache that has not yet been written to the disk subsystem.
- The controller detects an Error-Correcting Code (ECC) error while performing its cache checking routine during initialization.
- The controller discards the cache rather than sending it to the disk subsystem because the data integrity cannot be guaranteed.
- The battery may be undercharged.
Resolution
If there is an issue with every reboot, collect the RAID logs using the steps in 000037640 - How to collect RAID logs using Intel RAID CmdTool2. When you have the logs, contact RSA Customer Support.
Notes
Related Articles
Foreign configuration(s) found on adapter error on boot of RSA SecurID A250 hardware appliance 13Number of Views KCA has problems publishing to Microsoft Exchange Server 16Number of Views Insufficient privileges error when using the review URL (review_rvw_url) in email RSA Identity Governance and Lifecycle 58Number of Views RSA SecurID Appliance hangs when booting on NTP service for RSA Authentication Manager 8.1 339Number of Views RSA Authentication Manager server fails to boot starting Dracut Emergency shell 52Number of Views
Trending Articles
How to manipulate imported RSA SecurID Software Token(s) on an iPhone or iPad device Manual synchronization introduced in RSA Authentication Manager 8.2 Service Pack 1 patch 6 Quick Setup Guide - Passwordless Authentication in Windows MFA Agent for Active Directory How to verify NTP server synchronization is not working in RSA Authentication Manager 8.x RSA Identity Governance & Lifecycle Attribute Synchronization fails with Access Fulfillment Express (AFX) error
Don't see what you're looking for?