Changing Internal IP address on the Crossovers in a LogSmart Environment
3 years ago
Originally Published: 2007-09-13
Article Number
000043424
Applies To
enVision
crossover IP
internal IP
Issue
How to change internal IP addresses on the crossovers in an LS series appliance site
Resolution
To change internal IP addresses on the crossovers in an LS series appliance site before the initial install (before running the enVision Configuration Wizard):

1. Change Network interfaces configuration on both ends of all cross-over interfaces.

2. Modify the crossover address in the c:\WINDOWS\system32\drivers\etc\lsconfigurationwizard.cfg (or c:\WINNT\system32\drivers\etc\lsconfigurationwizard.cfg) file.



To change internal IP addresses on the crossovers in an LS series appliance site after the initial install (after running the enVision Configuration Wizard):

1. Change network interfaces configurations on both ends of all cross- over interfaces between D-SRV and the A-SRV (or LC).

2. Modify the crossover address in the c:\WINDOWS\system32\drivers\etc\lsconfigurationwizard.cfg (or c:\WINNT\system32\drivers\etc\lsconfigurationwizard.cfg) file.

3. Change NTP server configuration on A-SRV (LC) servers:

    >net time /SETSNTP:{ipaddress}

4. Change the C:\WINNT\system32\drivers\etc\hosts and C:\WINNT\system32\drivers\etc\lmhosts on all servers.

5. Change NIC DB Replication client configuration on A-SRV (LC) servers:

    >%_ENVISION%\database\cmd\set_mobilink_host.cmd {new_server_ip}

6. Restart all servers on the site.
Don't see what you're looking for?