Replica will not Authenticate Multiple Authentications
Originally Published: 2001-08-22
Last Modified: 2023-10-06
Article Number
000056346
Applies To
RSA ACE/Server 5.0 (no longer supported as of 8-15-2004)
Replica
Issue
Replica will not Authenticate, Multiple Authentications
Error: "Access Denied"
multiple authentications fail with: ACCESS Denied
Activity log:
08/10/2001 14:02:45U farquhva/cbsace01.cbs.fiserv.net          000037794746/Vince F
08/10/2001 10:02:45L Passcode accepted                         cbsace02.cbs.fiserv.
08/10/2001 14:02:47U farquhva/cbsace01.cbs.fiserv.net          000037794746/
08/10/2001 10:02:47L ACCESS DENIED, multiple auths             cbsace02.cbs.fiserv.
Cause
This is caused by the incorrectly set sdconf.rec file running on the replica server.
Resolution
Edit the sdconf.rec file using Start>Programs>RSA ACE Server>Configuration Management
-  Click on Edit >> and click OK to Reminder msg.
-  Check RSA ACE/Server Identification >> Make sure This server has the correct Fully Qualified Domain Name (FQDN) this should not by just the short name. Use Shift+Tab from the highlighted This Server IP Address field and when the Cursor moves up to the This Server field the name should resolve to the FQDM.
         -  If this fails you will need to check your networking properties (DNS, Wins & Hosts file)
         -  In the hosts file (winnt\system32\drivers\etc\hosts) the entry should be as follows for all replicas on every replica:
     IP Addr.  (Tab)     FQDN               (Tab) Host Name
10.10.10.192     acesrvr.mydomain.com     aceserver

Related Articles

Trending Articles

Don't see what you're looking for?