What is procedure to add or reconnect Cisco ESA partner to RSA DLP?
2 years ago
Originally Published: 2014-01-09
Article Number
000048792
Applies To
RSA Data Loss Prevention
Issue
What is procedure to add or reconnect Cisco ESA partner to RSA DLP?

Error: "invalid serverUID" in CiComponentShell.log with TRACE enabled

Resolution
Allow the Cisco ESA to add itself to the RSA DLP Enterprise Manager.
Adding the device manually to the EM may result in duplicate entries and communication failures.
Confirm the following setting in application.properties:
          interop.enableOnStartup=true
Note: if you recently upgraded from 9.5 to 9.5 SP1 the setting may have been changed to false during the upgrade
Stop the Enterprise Manager and Local Site Interop services
Delete the RSA\Site\ci.db file
Remove all entries for this partner from the following tables:
DV_DEVICE, DV_DEVICE_IP_ADDRESSES, DV_DEVICE_PACKAGE_LEVEL, DV_DEVICE_STATUS
Remove the ci.db from the Cisco ESA (contact Cisco regarding procedure for this action)
Start the Enterprise Manager and Local Site Interop services
Allow time for the Cisco to communicate to the Enterprise Manager and the partner device record should be automatically generated in DLP

Notes
To see activity on the interop service, enable TRACE logging using knowledgebase article a63258
Don't see what you're looking for?